Home

News

Forums

Hardware

CPUs

Mainboards

Video

Guides

CPU Prices

Memory Prices

Shop



Sharky Extreme :


Latest News


- Dell Joins the Netbook Movement with its Inspiron Mini 9
- Kingston is the First to Offer Ultra Low-Latency DDR2 Notebook Memory
- Logitech Unleashes Three New Keyboards
- NEC Adds New Servers to Product Line
- Lian-Li Launches New Power Supply Line, Rack Mount Kit and Fan Blower
News Archives

Features

- SharkyExtreme.com: Interview with Microsoft's Dan Odell
- SharkyExtreme.com: Interview with ATI's Terry Makedon
- SharkyExtreme.com: Interview with Seagate's Joni Clark
- Half-Life 2 Review
- DOOM 3 Review

Buyer's Guides

- July High-end Gaming PC Buyer's Guide
- May Value Gaming PC Buyer's Guide
- March Extreme Gaming PC Buyer's Guide

HARDWARE

  • CPUs

    - AMD Phenom X4 9950 BE & 9350e Review

  • Motherboards

    - AMD 790GX Chipset Review
    - Gigabyte GA-MA790FX-DS5 Motherboard Review
    - AMD 780G Chipset Review

  • Video Cards

    - PNY XLR8 GeForce 9800 GX2 1GB Review




  • Moving on to the core of the GA-6CX's appeal, you can see from the spec sheet that it supports 13 front side bus speeds for CPU overclocking as well as clock multipliers that range from 2.0x to 8.0x.

    Unfortunately there's both good news and bad news when we talk about the GA-6CX's implementation of those manual FSB controls.

    First the good news.

    When choosing the higher FSB settings, the GA-6CX automatically adjusts the all-important PCI and AGP clock dividers to appropriate levels so as not to corrupt the data sent across the system's bus. Settings of 1/2, 1/3, and 1/4 of the FSB speed are possible on the PCI bus, while the AGP bus sets itself to run at either 2/3 or 1/2 of whatever speed the FSB is set at.

    Now the bad news.

    While the manual CPU clock multiplier control is located within the GA-6CX's BIOS and is easily manipulated (although we doubt you'll touch it thanks to Intel's CPUs being multiplier locked), the controls for selecting the front side bus speed of the system are relegated to the smallest dip-switches we've ever seen.

    How small?

    Lets put it this way: Most small screwdrivers are too thick to be able to wedge into position to flip the switches back and forth.

    Micro Dip-Switches

    This is a glaring error on Gigabyte's part as the rest of the GA-6CX is an ergonomic delight. Even the ATX and floppy drive connector ports are smartly located in our favorite spot south of the RIMM banks on the board, which, as illogical as it may seem, is often overlooked by the larger mainboard designers.

    Why Gigabyte decided on equipping their flagship i820 mainboard with such a frustrating method for manipulating the system's speed is beyond us. We hope they opt to place a standard sized dip-switch bank on the GA-6CX when the next revision of this board makes its way to market some time in the future.

    In using the dip-switches over and over as we pressed the GA-6CX and a host of Intel Coppermine CPUs to the brink of their overclocked limits, we noticed another unwanted side effect of the small switches.

    After changing their position approximately 40 - 60 times, one of the small plastic dip-switches had actually worn down to the point where it was unusable. Upon closer inspection (magnifying glass) we noticed that another of the four switches was also quickly wearing away into oblivion.





    Copyright © 2002 INT Media Group, Incorporated. All Rights Reserved. About INT Media Group | Press Releases | Privacy Policy | Career Opportunities