Home

News

Forums

Hardware

CPUs

Mainboards

Video

Guides

CPU Prices

Memory Prices

Shop



Sharky Extreme :


Latest News


- Toshiba Extends Notebook Line with 5400 and 7200-RPM Drives
- Patriot Hits "Warp" Speed with New Line of Solid State Drives
- OCZ Adds the Elixir Keyboard to its Alchemy Gaming Line
- Seagate Unleashes 1.5TB of Storage with the Latest Barracuda Hard Drive
- Lancool Unveils their K1 and K1-Pro Mid-Tower Cases
News Archives

Features

- SharkyExtreme.com: Interview with Microsoft's Dan Odell
- SharkyExtreme.com: Interview with ATI's Terry Makedon
- SharkyExtreme.com: Interview with Seagate's Joni Clark
- Half-Life 2 Review
- DOOM 3 Review

Buyer's Guides

- July High-end Gaming PC Buyer's Guide
- May Value Gaming PC Buyer's Guide
- March Extreme Gaming PC Buyer's Guide

HARDWARE

  • CPUs

    - AMD Phenom X4 9950 BE & 9350e Review
    - AMD Phenom X3 8750 Review

  • Motherboards

    - Gigabyte GA-MA790FX-DS5 Motherboard Review
    - AMD 780G Chipset Review

  • Video Cards

    - PNY XLR8 GeForce 9800 GX2 1GB Review
    - Gigabyte Radeon HD 3870 512MB Review
    - ASUS EN8800GT TOP 512MB Review




  • Designed to be more efficient than the North/South Bridge that preceded it, the hub architecture sports a MCH and an ICH. What? Didn't catch all of that? Let us explain.

    The Memory Controller Hub (or MCH) is the center of activity for the memory bus, the AGP bus and the system bus. Notice the lack of a "little green heatsink?" This can be attributed to the move from the .35-micron to the .25-micron process (reducing the heat produced).

    Intel's new MCH supports front side bus frequencies of 133 and 100MHz, meaning the P3C-E,like other i820 boards, won't be able to run with a Celeron under the hood.

    Many people in the overclocking community have run into problems with 440BX boards due to limitations of the AGP bus divider and the frequencies at which their graphics cards would stably run . Luckily, the P3C-3 incorporates an AGP divider of 1/2, increasing the probability of a successful overclock.

    What used to be the South Bridge is now the I/O Controller Hub (or ICH). Running the PCI bus, the ISA bus, USB ports, the AMR and the Super I/O (keyboard, mouse, floppy disk), the ICH also offers support for DMA/66.

    We won't go into much detail about the Audio Modem Riser (AMR) because we don't consider it a feature. Basically a soft-modem/sound card combination, gamers will shun it for the extra CPU usage it consumes. Expect to see OEM's utilizing the AMR to save some money (and beware!).

    For those who aren't quite ready to invest in RDRAM, ASUS also makes a SDRAM to RIMM converter with an onboard Memory Translator Hub (MTH). This conversion is expensive in terms of performance though and should be avoided if at all possible.

    These architecture changes are the first we've seen since the introduction of the FX chipset, which was released in conjunction to the Pentium II. Hopefully, this new design will be able to further eliminate bottlenecks associated with the North/South Bridge layout.

    • Slot 1 for Intel® Pentium® III / Pentium® II 350 ~ 733+ MHz with Built-in 512KB L2 Cache
    • Support 133MHz / 100MHz Front Side Bus (FSB) Processors
    • Supports ASUS® S370-133 CPU Card for FC-PGA Coppermine PIII Processors
    • External Frequencies, Vcore & Vio Adjustable
    • Supports The Fastest RDRAM Memory with RAMBUS Architecture
    • Advanced MCH + ICH + FWH Architecture





    Copyright © 2002 INT Media Group, Incorporated. All Rights Reserved. About INT Media Group | Press Releases | Privacy Policy | Career Opportunities