Supports Intel Pentium II/III processor up to 600MHz or above and PPGA Celeron processor via Slocket.

Chipset

• VIA Apollo Pro 133 AGPset
• Winbond W83977EF I/O Set
• Winbond W83781D Hardware Monitor Controller

Bus Frequency

• Supports 66/75/83/100/103/105/110/112/115/120/124/133/140 to 150 MHz System Bus Clock Selection
• Selectable CPU Multiplier Setting from 3x to 8x with 0.5 increment
• Supports "Bye-Bye Jumper"; Iwill Smart Setting.
• Adjustable Vcore (+5%, +10%) & VIO (3.4V, 3.6V, 3.8V)

System Memory

• Supports 3 x 168 pin 3.3V unbuffered SDRAM
• Supports PC-133 SDRAM from 8MB up to 1.25GB
• Supports ECC SDRAM Module
• Supports VCM (Virtual Channel Memory) SDRAM
• Supports SPD SDRAM Module

On Board IDE

• Dual Ultra DMA 33/66 IDE Ports
• Supports ATAPI IDE CD-ROM, ZIP-100 & LS-120

I/O Interface

• 1 x Floppy port
• 1 x PS/2 Keyboard
• 1 x PS/2 Mouse
• 1 x Parallel Port
• 2 x Serial ports
• 2 x Ultra DMA 33/66 Bus Master IDE ports

Expansion Slots

• 1 x AGP Slot, Supports AGP 2X Mode
• 5 x PCI Bus Master Slot, 33MHz PCI 2.1 compliant
• 2 x ISA Slot, 16 bit ISA bus

BIOS

• 2-Mbit Flash ROM with Write Protection
• Y2K ReadyAward BIOS with Green Plug & Play
• ACPI for PC 98/Win 98 compliant
• IDE, LS120, ZIP, and CD-ROM Bootable
• "Bye-Bye Jumper"IWILL Smart Setting for BIOS CPU Frequency Setting

Power Management

• ATX Spec
• Keyboard Power On
• Wake On LAN (WOL)
• Wake On Modem (WOM)
• Power Failure Recovery (AC power resume)

RTC Alarm

• CPU Fan Off in suspend mode
• System Overheat Buzzer
• Windows 98/95 power off
• Suspend to Disk (STD)

Board Size

• ATX Form Factor, 188mm x 305mm, 4 layers