- Most Common Windows 10 Update Error Encountered
- Fixes For When Windows 10 Update Error Encountered
- Final Thoughts
Keeping your operating system up-to-date is of the utmost importance. Microsoft rolls out frequent updates for Windows 10 to address potential security issues, incorporate brand-new features, and enhance performance.
These regular updates guarantee that any openings in security will be patched up, reducing the possibility of exploits so that you can enjoy a computer running as smoothly as ever!
Most Common Windows 10 Update Error Encountered
There are a few different Windows 10 update error codes that you may encounter, and each of them requires a specific solution. Listed below are the most common update errors:
- 0x80073712 – This error occurs when your computer has missing or corrupted files. The best way to fix this error is to use an in-built tool called DISM (Deployment Image Servicing and Management) or System File Checker (SFC) scan to locate and repair the file.
- 0xc1900223 – This error indicates that the update could not be successfully downloaded or installed. There is no need to take any action at this time; Windows Update will try to download the update again. However, if this error persists, you can try using Windows Update Troubleshooter to diagnose and repair the issue.
- 0xC1900107 – This error occurs when the download process has been interrupted and indicates that the downloaded files cannot be completely installed. It’s majorly due to a cleanup effort remaining incomplete from a prior installation leading to a system restart to continue the upgrade. To fix this issue, reboot your system and try to update Windows 10 again.
- 0x800F0923 – This could signify that a driver or other software on your computer is not compatible with the Windows 10 update. To fix this, try disabling any recently installed software or device drivers and then run Windows Update again.
- 0x800F0922 – An inability to connect to Windows Update Servers may be the cause of this error. If you’re having trouble upgrading while connected over a virtual private network aka a VPN, try disconnecting from the VPN and/or your work network. Insufficient space in the System Reserved partition may also account for the problem. It’s possible that expanding the System Reserved partition with a third-party program will solve this issue.
- 0x8007042B 0x4000D – When you start your Windows system normally, a number of programs and services launch and begin operating in the background. Standard system procedures, virus protection software, utility programs, and other installed software all fall under this category. Incompatibilities between these programs and the upgrade version of Windows 10 are possible and can cause this error. To fix this, you’ll need to disable any programs or services that launch automatically and then attempt the update again.
- 0x80070002 0x20009 – Under this error, the specified file was not located by the system. To fix this, try running the System File Checker (SFC) scan on your computer. This will locate and repair any corrupted system files(If any).
Fixes For When Windows 10 Update Error Encountered
The update error encountered is usually caused by corrupted or missing system files. It can also occur when the Windows Update service has been disabled, either manually or by a virus/malware infection. Conflicts between different software programs running on your computer may interfere with Windows updates and lead to an error occurring, as explained above. To resolve any such issues, try these simple solutions:
FIX 1: Scan Files with System File Checker (SFC)
System File Checker (SFC) is a command-line tool that can locate and repair corrupted or missing system files. It is important to run a scan with SFC before attempting any further Windows Update troubleshooting.
To do this, follow these steps:
- Search for the “Command Prompt” on the Windows search box, right-click on its icon, and select Run as administrator.
SFC /scannowin the command prompt window and press Enter to execute it.
- Wait for the scan to finish. It might take a few minutes.
- Once the scan is completed, you should be able to install updates properly.
FIX 2: Execute the DISM Command
If the System File Checker scan does not resolve the Windows Update error, you can try using the DISM command instead. These both serve the same purpose. However, the DISM command additionally fixes any update errors caused by damaged system image files.
Instructions on how to use this command are as follows:
- Open the Command Prompt window with administrator privileges, as mentioned earlier.
- Type “
DISM /Online /Cleanup-Image /RestoreHealth” and press Enter to execute the command.
- Wait for the DISM command to finish running. This might take a few minutes.
- After the command has been executed, try installing updates again and see if it works now.
FIX 3: Play around with the Windows Update Troubleshooting Tool
Most of the time, it is hard to pinpoint the exact problem in the Windows system, leading to the error codes encountered. To tackle this issue, Microsoft has put out a Windows Update Troubleshooting Tool that checks for anything that may be preventing the successful completion of updates.
It can detect any missing or corrupt system files, as well as incorrect Windows Update settings, and will repair any errors that are preventing Windows 10 from being updated.
To use this tool:
- Click on the Start button and choose Settings from the Start Menu.
- Select Update & Security under Windows Settings.
- Switch to the Troubleshoot tab on the left pane and select Additional troubleshooters on the right.
- Look for the Windows Update troubleshooter and select it.
- Click the Run the troubleshooter button.
- Windows will now look for the problems.
- After the troubleshooting is completed, Windows will list the problems and possible solutions.
FIX 4: Free Up Some Room on Your Hard Drive
If you’re still running into issues when attempting to update Windows 10, then it’s possible that there is insufficient room on your hard drive for the update to be installed. Thus, free up some room by cleaning out any temporary files or moving them onto external storage devices and try updating Windows again.
- Open the Start menu and type Disk Cleanup in the search bar.
- Select Disk Cleanup from the list of results and click on it to launch the tool.
- Choose the drive you want to clean up and click OK.
- Now check all the boxes, including temporary files, recycle bin, etc., and hit OK.
- Wait for the tool to finish cleaning up the drive.
There are several potential causes in case of a Windows 10 Update Error Encountered. Fortunately, most of these are easy to diagnose and fix with either the System File Checker or the Windows Update Troubleshooting Tool. It is important to note that before trying any of these fixes, ensure that your computer has adequate disk space available and that all third-party programs and services are disabled.
After you’ve taken the necessary steps to ensure your system is compatible, you can be confident in running through these troubleshooting instructions and ultimately upgrade to any Windows 10 Updates!
What is the System File Checker?
The System File Checker (SFC) is a command-line tool that can locate and repair corrupted or missing system files. Running this scan before attempting any further Windows Update troubleshooting may help you resolve the issue.
How do I know if the file is corrupt?
If your system is unable to update, then it could be due to a corrupted file or incompatibility issue. You can run the System File Checker (SFC) scan mentioned above or use the Windows Update Troubleshooting Tool, which checks for any errors that may prevent Windows 10 from updating correctly.
Which are some common Error Codes?
Common Windows Update error codes include 0x8007000D, 0x80240034; 0x8007000E, 0x80070057, 0x80242006, 0x80070020, 0x80244018, 0x80D02002, 0x80246008, 0x80246017, 0x80240438, 0x80096004 and 0x80240034. These signify different issues and can be resolved using the solutions outlined in this article.